Addictor Parts

Sort By:  
Small bilge hatch
$99.95
Front hatch for the Hugger
$79.95
Twin stick replacement controls.
$186.79
These hinges are original equipment replacement, folding hinges.
$9.99
A new, complete rack and pinion steering assembly.
$200.99
Keep the water out!
$22.95
A replacement combination bow light.
$18.00
Removable, stowaway rear navigation light.
$65.49
Replacement transom handles for your mini.
$9.94
Group 24 battery tray
$16.95
Reproduction stickers for your Addictor
$10.00
A new Teak replacement for your old cracked dash handle.
$24.39
Replacement Bow Handle
$17.49
Blank cushion boards
$49.95
These hinges are original equipment replacement, folding hinges.
$19.79
All new rub rail fits Addictor 190, 245 and all Aqua Lark Models
$189.95
Rental Lark Hatch
This is the small hatch that allows access to the bilge on Rental Lark models. White gel coat. Custom colors are available.
Small bilge hatch
$99.95
Sport Lark/Hugger Hatch
This hatch is found on the front of Hugger and/or Sport Lark models. White gel coat. Custom colors are available.
Front hatch for the Hugger
$79.95
Addictor/Aqua Lark Motor Controls
These controls are an inexpensive option to replace your old and tired motor controls. Available in White or Black. Cable connector kit is required and varies based on your motor.
Twin stick replacement controls.
$186.79
Addictor 190/Aqua Lark Bimini
Custom bimini top for Addictor 190 and Aqua Lark models. Your choice of 2 Sunbrella colors. Aluminum frame and stainless steel hardware. Please contact us directly to order.
$350.00
Addictor/Aqua Lark Motor Controls Cable Adapter Kit
This cable connector kit is required to utilize the most common 33C control cables with our replacement control box. Check your application.
Required for 33C cables
$13.99
Addictor/Aqua Lark Seat Base Hinges
These connect the seat base to the floor. 2" wide x 11" long. One will work, but two are best. Sold individually.
These hinges are original equipment replacement, folding hinges.
$9.99
Steering Assembly
Precise, easy 4 turns lock-to-lockStandard 3/4" round tapered steering shaftStainless steel cable output endsMeets A.B.Y.C. standards and N.M.M.A. certification requirementsIncludes: - Helm - Bezel Kit - Steering Cable Specify your preferred steering cable length.


New Installation: Measure cable routing path from wheel center line to engine connection, as follows: A=Center line of wheel to gunwale (or deck, if routed downward), B=Dash to transom, C=Gunwale to centerline of cable connection at centered tiller. Please refer to image below





For Cable Installations through the Engine Tilt Tube: Add A, B & C + 6", then round up to the next foot. Order that length cable.For Cables Mounted to Transom, Splashwell or Stringer: Add A, B & C, then subtract 6" and round up to the next foot. Order that length cable.

Replacement of Existing Cable: If possible, find the part number stamped on the plastic jacket of the old cable. If you removed the old cable, measure for the replacement cable as follows: For Rack Steering Cable Replacement, Measure Existing Cable as follows:





Measure plastic cable jacket ("Y" dimension shown in above drawing) in inches, add 30", and round up to next foot. Order that length cable
A new, complete rack and pinion steering assembly.
$200.99
Bilge Pump
Ideal for pumping water out of small areas such as small boats, jet boats or PWC's. Constructed of white ABS plastic with an easy to clean twist off strainer. 3/4" outlet. 3" W x 4" H.
Keep the water out!
$22.95
Addictor/Aqua Lark Bow Light
Chrome plated zinc. Combination bow light meets USCG specifications for navigation lighting.
A replacement combination bow light.
$18.00
36" All Round Pole Light
2-mile, 360° visibility, for boats up to 39.4' (12 meters) in length. ZAMAK base with swivel cover that protects the socket when light is stowed. Base extends just 3" below deck. Includes 8-watt wedge-base lamp. Has three countersunk holes for #10 fasteners. USCG requires rear light to be 1 meter above bow light.
Removable, stowaway rear navigation light.
$65.49
Addictor/Aqua Lark Transom Handle
6" transom handle, chrome plated zinc. Sold individually.
Replacement transom handles for your mini.
$9.94
Battery Tray
Premium battery tray complete with stainless steel hold down rods. Note: Will not fit Exide® batteries.
Group 24 battery tray
$16.95
Addictor Logo Decals
Sold in pairs. Addictor 245 and Addictor 333 also come with accompanying model designator - "1/4 pounder" or "bambino". Base height of all decals is approximately 2". Custom sizes and colors are avaialbale. Contact us for more information.
Reproduction stickers for your Addictor
$10.00
Addictor 190/Aqua Lark Seat Cushion Boards
Ready for your foam and upholstery. Waterproofed with fiberglass resin.
Blank cushion boards
$49.95
Addictor/Aqua Lark Dash Handle
This is a white polymer replacement handle for your Addictor or Aqua Lark Dash. 13" x 2-3/8" x 3/4"
A new Teak replacement for your old cracked dash handle.
$24.39
Addictor/Aqua Lark Bow Handle
Chrome plated zinc. #8 screws. 6-1/2" long x 2" high.
Replacement Bow Handle
$17.49
Addictor 245 Cushion Boards
Ready for your foam and upholstery. Waterproofed with fiberglass resin.
Blank cushion boards
$49.95
Addictor/Aqua Lark Seat Hinges
These connect the seat back to the seat base. Aluminum. Sold in pairs.
These hinges are original equipment replacement, folding hinges.
$19.79
Rub Rail Molding 25'
Sold in 25' lengths, this is enough to replace the rub rail on an Addictor 190, Aqua Lark or an Addictor 245. Bambinos require more, so call if you're ordering for a 333.
All new rub rail fits Addictor 190, 245 and all Aqua Lark Models
$189.95
Per Page      1 - 19 of 19
  • 1